K341 prints this MATHEMATICAL FORMULAE page at the front of
every A-Math paper. Everything below is given to you, so no marks go for recalling
it — they go for knowing which one the question wants.
The G2 paper (K232) prints the same page without the binomial
expansion — the Binomial Theorem is not in the G2 syllabus.
1. Algebra
| Quadratic equationfor ax² + bx + c = 0 | The E-Math paper does not give you this one. |
| Binomial expansion G3 | where n is a positive integer |
| and G3 | |
2. Trigonometry — identities
| Pythagorean |
|
| Compound angle |
|
| Double angle |
|
Formulae for △ABC
| Sine Rule | |
| Cosine Rule | |
| Area | |
That is the whole page. It is generous with trigonometry and silent about
almost everything else — logarithms, surds, coordinate geometry, every rule of calculus,
and even the R-formula. Those are on the You must memorise tab.
None of this is printed on your paper. These are the formulae the
A-Math chapters teach that the formula sheet does not give — gathered in one place. Each
link opens the chapter that teaches it.
You have chosen G2 A-Math, so formulae from G3-only content are hidden.
Algebra
Quadratic functions am-c1
| Completed square form | turning point (h, k); minimum if a > 0, maximum if a < 0 |
| Always positive / always negative | a > 0 and b² − 4ac < 0 · a < 0 and b² − 4ac < 0the curve never touches the x-axis |
Equations and inequalities am-c2
| The discriminant | > 0: two real distinct roots · = 0: two real equal roots · < 0: no real roots · “real roots”: ≥ 0 |
| A line and a curve | substitute the line into the curve, collect to … = 0, then test that quadratic’s discriminanttangent ⇔ = 0 · meets at two points ⇔ > 0 · does not meet ⇔ < 0 |
| Quadratic inequality, roots α < β | (x − α)(x − β) < 0 ⇔ α < x < β · (x − α)(x − β) > 0 ⇔ x < α or x > βrearrange to … > 0 or … < 0 first |
| The three laws | for a, b > 0 |
| Conjugate surds | and multiply top and bottom by the conjugate to rationalise a denominator |
| Equal surds | if then a = c and b = da, b, c, d rational, √k irrational |
Polynomials and partial fractions am-c4
| Division algorithm | dividend = divisor × quotient + remainderthe remainder has a lower degree than the divisor |
| Remainder and Factor Theorems | dividing f(x) by x − a leaves f(a); x − a is a factor exactly when f(a) = 0for ax + b, substitute x = −b/a |
| Sum and difference of cubes |
|
| Partial fractions — the three forms | distinct linear factors: a repeated factor: a quadratic factor: an improper fraction is divided first |
Binomial Theorem am-c5 G3
| Factorial | and 0! = 1the theorem, both forms of the coefficient and the general term are all on your paper |
| General term | the middle term of the printed expansion — the kth term has r = k − 1 |
Exponential and logarithmic functions am-c6 G3
| Equivalence | ⇔ for a > 0, a ≠ 1 |
| Special values | |
| The three laws |
|
| Change of base | |
| Growth and decay models | or N0 is the value at t = 0; growth k > 0, decay k < 0 |
Geometry and trigonometry
Coordinate geometry am-c7
| Parallel and perpendicular lines | |
| Midpoint | |
| Line through a point | |
| Circle |
centre (−g, −f), radius √(g² + f² − c) |
| Area of a rectilinear figure | the shoelace array, vertices taken anticlockwise, halved |
Linear law am-c8 G3
| Straight-line form | rewrite the relationship so the unknown constants become the gradient and the Y-intercept; for y = axn or y = kbx, take logs first |
Trigonometric functions and graphs am-c9
| Radians | arc length rθ and sector area ½r²θ are on your paper |
| Exact values | sin 30° = ½, sin 45° = , sin 60° = tan 30° = , tan 45° = 1, tan 60° = cos runs the sine values backwards: cos 30° = sin 60°, and so on |
| Signs by quadrant | ASTC: All positive, then Sin, then Tan, then Cosquadrant and basic angle first, then the sign |
| Negative angles | |
| y = a sin(bx) + c | amplitude |a| · period or · axis y = cmax |a| + c, min −|a| + c; for y = a tan(bx) the period is 180°/b |
Trigonometric equations and identities am-c10
| Reciprocals and quotients | cosec goes with sin, sec with cos |
| The R-formula — asked for by name, not given |
with and , a and b positive; maximum R, minimum −R |
Proofs in plane geometry am-c17 G3
| Midpoint Theorem | M, N midpoints of AB, AC ⇒ MN ∥ BC and MN = ½BCand its converse: parallel and half ⇒ midpoints |
| Tangent-Chord Theorem | the angle between a tangent and a chord = the angle in the alternate segmentalso called the Alternate Segment Theorem |
| Tangent and secant | worth recognising: tangent PT, and PAB cutting the circle at A and B |
| Every line of a proof | a statement and its reason in bracketsE-Math’s circle properties and congruence tests are assumed |
Calculus
Gradients and differentiation techniques am-c11
| Power rule | any rational n; rewrite roots and reciprocals as powers first |
| Chain rule | |
| Product rule | |
| Quotient rule | bottom × d(top) minus top × d(bottom), over bottom squared |
Applications of differentiation am-c12
| Tangent and normal at (x1, y1) | tangent gradient m = dy/dx at the point; normal gradient −1/m |
| Increasing and decreasing | : increasing: decreasing |
| Connected rates of change | |
| Stationary points | ; then maximum, minimumif the second derivative is 0, use the first-derivative (sign) test |
Differentiation of trigonometric, exponential and logarithmic functions am-c13 G3
| The five derivatives |
x in radians |
| With a linear inside | and so on: the derivative of the inside multiplies the front |
| Logarithm of a function | |
| Power rule | n ≠ −1; divide by the new index |
| Linear inside | n ≠ −1 |
| Trigonometric G3 |
watch the minus sign on sin |
| Exponential and n = −1 G3 | |
Applications of integration am-c15
| Definite integral | F is any antiderivative of f |
| Area above the x-axis | area = when f(x) ≥ 0 on [a, b] |
| Area below the x-axis G3 | area = split the region where the curve crosses the axis |
Kinematics am-c16 G3
| The ladder | find each “+ c” from the given values, usually at t = 0 |
| Key conditions | instantaneously at rest: v = 0 · at O: s = 0 · greatest speed: a = 0distance travelled: add the distances between the times when v = 0 |
The two papers (K341 G3 Additional Mathematics)
| Paper 1 · 2 h 15 min · 90 marks · 50% | 12 to 14 questions of varying marks and lengths, up to 10 marks each. Answer all of them. |
| Paper 2 · 2 h 15 min · 90 marks · 50% | 9 to 11 questions of varying marks and lengths, up to 12 marks each. Answer all of them. |
The G3 Mathematics syllabus is assumed: it is not tested directly, but a question may lean on it.
The G2 papers (K232 G2 Additional Mathematics)
| Paper 1 · 1 h 45 min · 70 marks · 50% | 13 to 15 questions of varying marks and lengths. Answer all of them. |
| Paper 2 · 1 h 45 min · 70 marks · 50% | 8 to 10 questions of varying marks and lengths. Answer all of them. |
What the front page of every paper says
These are the rules printed on the paper itself. Quoted from the syllabus; the words in brackets are ours.
| Working | “Omission of essential working will result in loss of marks.” (A bare answer earns the answer mark at most; the method marks sit on the lines that lead to it.) |
| Accuracy | “Give non-exact numerical answers correct to 3 significant figures, or 1 decimal place in the case of angles in degrees, unless a different level of accuracy is specified in the question. In questions which explicitly require an answer to be shown to be correct to a specific accuracy, the answer must be first shown to a higher degree of accuracy.” (Round once, at the end. Carry at least 4 s.f. through the working, or keep the value in the calculator.) |
| π | “Unless the question requires the answer in terms of π, the calculator value for π or π = 3.142 should be used.” |
| Units and time | SI units are used for mass and measures; compound units use the solidus (5 m/s, 13.6 g/cm3); the 12-hour and 24-hour clock may both be used (3.15 p.m. is 15 15). |
| Calculators | “An approved calculator may be used in both Paper 1 and Paper 2.” (A question that says without using a calculator or do not use a calculator is marked on the exact working it asks for.) |
| Formulae | “Relevant mathematical formulae will be provided for candidates.” (Exactly what is provided, and what is not, is the other two tabs of this window.) |
What this means when you write
Exact answers stay exact: a fraction, a surd, a multiple of π. Only a decimal that does not terminate gets rounded, to 3 s.f., and only on the answer line. Angles in degrees go to 1 d.p.; money to the nearest cent.
Show the line that chooses the method (the formula written out, the equation set up, the rule named) before the line that uses it. That is where the method mark lives.